601029 400ml bardahl foamy chain lube ultra high performance chain lubricant 400ml

Spray lubricant with high penetration and lubricating capacity, specifically formulated for all types of highly stressed chains, including self-lubricating chains (0-RING).
Product Plus

Powerful lubricating action and EP (Extreme Pressure)
“Foamy” formula for extremely high penetration
Extends the life of the chain, crown and sprocket
Superior anti-wear, anti-rust and anti-corrosion power

Problem

Most chains are exposed to air, water, humidity.
Furthermore, motorcycle chains are in direct contact with dust, sand, mud: all this means certain corrosion and excessive wear.
Additionally, some chains (such as those on motorcycles, bicycles, snowmobiles, and haulers) have intricate links with tight, hard-to-reach spaces. Regular lubricants do not easily penetrate these spaces and tend to leak.
Solution

Bardahl Chain Lubricant contains: a penetrating substance, the Bardahl “polar attraction” formula, an anti-oxidant agent, and a blend of high viscosity oil with polymers for lubrication of hard-to-reach spaces.

The penetrant has a low surface tension that allows it to penetrate into narrow spaces; a capillary action in fact attracts it into the areas between the lateral parts of the meshes.
The BARDAHL “polar attraction” formula is composed of extreme pressure agents that adhere to the metal, forming a very resistant molecular film that smoothes metal surfaces, reducing friction and wear.
Friction protection is increased by the high-quality oil with polymers; once applied, it remains adherent to the surfaces.
The antioxidant works chemically to prevent oxidation, which causes rust and other types of corrosion.
The foaming agent allows for uniform application and prevents the inconvenience of over-spray.

Once penetrated, Foamy Chain Lube adheres, leaving a patina that prevents friction, protects against corrosion and dirt, and repels moisture.
Usage

Clean the chain with Kerosene and dry quickly with compressed air and rags
Rotate the wheel in the opposite direction to the direction of travel and apply the lubricant to the chain, between the internal plates and the external plates and centrally on the rollers, at the point immediately preceding the point of meshing with the sprocket.
Wait about 10-15 minutes and remove excess oil with a clean cloth.

Properties and technology of FOAMY CHAIN ​​LUBE

The exclusive Bardahl Polar Plus anti-friction formula forms a lubricating molecular film that, by chemically fixing itself to the metal, creates a permanent protective barrier against friction and wear to a much greater extent than conventional lubricants. Foamy Chain Lube contains special substances that, during dispensing, allow the formation of a penetrating foam on the surfaces capable of allowing the lubricant to reach deep between the links.

Performance Level

Viscosity at 40°C
181.92
Viscosity at 100°C
27.99
Viscosity index
190
Density at 15°C
0.895
Flash point VC (°C)
194
Code: 601029
The Product may be reserved exclusively for competitions in places specially designated for such purposes according to the provisions of the competent sports authorities. We decline all responsibility for improper use.
FOR INFORMATION DO NOT HESITATE TO CONTACT
Billaricambi staff

Per qualsiasi dubbio o informazione contatta lo staff Billaricambi SRLS.